Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

Portland Design Works Tail Light Bracket
$6.00
Grab a set of Portland Design Works tail light brackets to mount your lights on seat posts and seat stays. - Seat post and seat stay brackets - Rubber shims included for a custom fit - Compatible with all PDW tail lights except Asteroid and Fenderbot
Portland Design Works Tail Light Rack Bracket
$6.00
Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts
Specialized Stix Reflector Mount
$6.00
Mounts a Specialized Stix light to a CPSC, DIN standard reflector/rack bracket or the Specialized Pizza Rack. - Vertical CPSC hole pattern. - This mount can attach to the Horizontal Din hole pattern. - Specialized single hole pattern for the Pizza Rack. - Mounts Stix light horizontally. - Includes all mounting hardware.
NiteRider Micro USB Cable
$6.99
USB cable for USB rechargeable batteries. System Compatibility: - Lumina Series - Lightning Bug 120 USB - Sentinel 2W USB - Solas 2W USB - Stinger USB
Lezyne LED Handle Bar Mount
$7.99
Lezyne's Composite Bar Mount is a hard mount made of a reinforced Composite Matrix cradle for a strong and secure attachment of the Mega Drive, Deca Drive, and XL LED lights to the handlebar. It is designed for 25.4 mm or 31.8 mm bars, with the cradle designed to pivot 15 degrees laterally to allow adjustment of the LED light beam angle and directing it where it is most needed. A large thumb screw secures the CM mount to the bar without need of tools, and can be tightened by hand or a 1mm hex key. Molded rubber shims add grip and fine-tune fitting to undersized bars. Composite Bar Mounts are sold in a kit with the Mega Drive, Deca Drive, or XL LED lights.
NiteRider Tail Light Strap Mount
$7.99
The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seatposts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it’s time for a recharge.
Problem Solvers Front Rack Light Mount
$7.99
-Mounts easily to front racks with threaded M5 mounts -Allows for unobstructed light positioning -22.2mm clamping diameter
CatEye Saddle Rail Mount (RM-1)
$9.95
Optional Accessory Saddle Rail Mount Bracket for most CatEye taillights.
Lezyne CR 2032 Battery (8-pack)
$9.99
Replacement lithium ion CR2032 batteries for use in the Femto LED lights. SPEC: 700 mAh, 3.6V.
Lezyne Composite Helmet Light Mount
$9.99
Lezyne's versatile Composite Matrix Helmet Mount is a durable and versatile accessory for Lezyne Macro, Micro and Hecto Drive lights. It is constructed with lightweight and durable mold-injected Composite Matrix material for its base plate and spherical pivot. A strong rubber and Velcro strap attaches the mount to the helmet. The Composite Matrix spherical pivot and cradle allow the user to adjust the position of the light in all directions.
Lezyne Composite Helmet Mount (XL)
$9.99
Lezyne's versatile Composite Matrix Helmet Mount is a durable and versatile accessory for Lezyne Mini XL, Power XL, Super XL, Deca and Mega Drives. It is constructed with lightweight and durable mold-injected Composite Matrix material for its base plate and spherical pivot. A strong rubber and Velcro strap attaches the mount to the helmet. The Composite Matrix spherical pivot and cradle allow the user to adjust the position of the light in all directions.
Lezyne Universal Helmet Mount
$9.99
The versatile Composite Matrix Helmet Mount is a durable and versatile accessory for Lezyne KTV Pro, Power XL, Macro XL, Hecto XL and Micro XL Drives. It is constructed with lightweight and durable mold-injected Composite Matrix material for its base plate and spherical pivot. A strong rubber and Velcro strap attaches the mount to the helmet. The Composite Matrix spherical pivot and cradle allow the user to adjust the position of the light in all directions.
Light & Motion Imjin and Nip GoPro Mount
$9.99
Set up a light wherever you can connect a GoPro mount. Use this adapter to connect your Imjin or Nip to any GoPro mounting option.
Light & Motion Taz GoPro Mount
$9.99
Setup a light wherever you can connect a GoPro mount. Use this adapter to connect your Taz to any GoPro mounting option.
Light & Motion Urban/Deckhand GoPro Mount
$9.99
Setup your Light & Motion Urban or Deckhand light (sold separately) wherever you can connect a GoPro mount. Use this adapter to connect your Urban or Deckhand to any GoPro mounting option.
Light & Motion Vis 180 Aero Post Pad
$9.99
Light & Motion's Vis 180 Aero Post Pad lets you easily attach your Vis 180 taillight to the back of your aero seatpost so you can be fast and visible.
Light & Motion Vis 360 Spare Front Mount
$9.99
Strap Light & Motion's Vis 360 Spare Front Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.
Light & Motion Vis 360 Spare Rear Mount
$9.99
Strap Light & Motion's Vis 360 Spare Rear Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.
NiteRider Adjustable Angle Tail Light Strap Mount
$9.99
The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for their flagship tail light, the Sentinel. It allows you to fine tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It’s an easy-on and easy-off non-slip tail light mount that also features a grooved contact pad that makes this the ‘go-to’ mount for riders using aero seatposts. - Fits standard and aero seatposts System Compatibility: - Sentinel - Solas - Sabre - CherryBomb
NiteRider Handlebar Clamp Mount
$9.99
All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm. SYSTEM COMPATIBILITY - Lumina Series - MiNewt Cordless Series - Mako Series WARRANTY - This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)
NiteRider Handlebar Strap Mount
$9.99
The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended. System Compatibility: - Lumina Series - Mako Series - MiNewt Cordless Series
NiteRider Taillight Rack Mount
$9.99
The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory.
Planet Bike Fork Mount Bike Headlight Bracket
$9.99
The bolt-on headlight bracket mounts to your fork crown and provides a unique mounting option that centers a headlight just above the front wheel. It comes with a platform that is specifically designed to work with most Planet Bike lights. This platform can be removed quickly to create a 26.2mm diameter universal mount that accommodates most clamp and stretch strap mounting systems. - Planet Bike specific platform works with most Planet Bike headlights - Converts to a 26.2mm universal mount to fit most headlight mounting systems - Bracket bolts through brake mount on fork crown (60mm bolt, washer, and nut included) - Compatible with all Blaze, Beamer, Spok, Amigo and Spot headlights - Weight: 72 grams
Sunlite Bicycle Spoke Light
$9.99
• 2 LEDs with 3-color variable automatic flashing • Attaches to the spokes on your wheel so it spins for high visibility • The Spoke Light is ready whenever you're riding • It turns on/off automatically when it's dark/light
CatEye Center Fork Bracket
$10.00
CatEye's Center Fork Bracket helps clear your handlebars by positioning your favorite CatEye headlight (sold separately) in front of your bike's head tube.
Specialized Stix Arm/Leg Band Mount
$10.00
Increase your visibility by using the Stix Arm/Leg Band mount to attach your Specialized Stix light to arms and legs. - Includes rigid mount and fabric band for comfortable and secure hold. - Wraps around ankle to keep pant legs away from chainrings. - Increases visibility and versatility of Stix lights, both on an off the bike.
Specialized USB A Male to Mini B Charger Cable
$10.00
High-efficiency charger cable for Flux headlights. - High capacity wire can transfer more power with less loss. - Custom "L" shaped Mini USB Male for the best fit to Flux headlights. - NOTE: This is a CHARGE ONLY cable and cannot be used for data transfer.
Origin8 Eyelet Stub Light Mount
$10.59
Origin-8's Eyelet Stub Light Mount is an ingenious way to easily mount a light (or other accessory) to any bicycle frame with standard rack/fender eyelets. The Stub is made of light and tough 6061 aluminum tubing with an outside diameter of 26mm and an overall length of 46mm. It simply bolts to the eyelet with its included 5mm screw. There's a press-fit cap on the end to seal it.
CatEye Helmet Mount
$11.95
This helmet mount works with all CatEye Lights. Pair it with the Volt 800 for the ultimate trail solution.
Light & Motion Helmet Mount for Seca, Vega, and Stella
$12.99
This mount is designed to securely attach your Light and Motion Seca, Vega, or Stella headlight (sold separately) to your helmet. With a helmet mount, the light is always pointing where you're looking.