- Be safe and be seen with hi-viz red LED safety lights - 360-degree visibility with rapid blink, slow blink, and full glow LED modes - Sweat-proof, water resistant design moves with you - Lightweight material for ultimate comfort - Dimensions: 2.68cm x 3.03cm x 1.02cm
- Simplistic safety light combo pack designed to be seen - Easy to install silicone strap attachment is compatible with 22.2-31.8mm bars - Both lights feature 3 modes including 1 steady and 2 flashing modes - Powered by 2 CR2032 batteries each
You can't be too careful when riding at night. Sunlite's K100/L300 Light Combo gives you extra visibility at a good price. The headlight sports a super-bright Krypton bulb, and the taillight uses 3 super-bright LEDs with both flash and steady modes. Both lights are housed in tough, water-resistant bodies so they're perfect for commuting year round. The taillight mounts to your seatpost, and the headlight uses a quick-release handlebar mount.
- Combo set featuring a 32 lumen front light paired with an 8 lumen tail light - 2 modes each, constant and flashing - 4 CR2032 batteries included - Water resistant design - Multi fit silicone rubber strap attachment
The Blinky Safety Light Set features a white headlight and a red taillight, both with super bright LEDs for top-notch visibility and safety. They also have flashing and steady modes providing 220 degrees of light that can be seen from up to 1 mile. Plus, these small flashers are weatherproof, light and durable. The included batteries deliver 100 hours of run time. And, handlebar, seatpost and seatstay mounts are included so they're super easy to put on your bike.
The Button Blinky Safety Set provides a quick way to keep you visible on your next bike ride. Two high output LEDs give you steady and flashing modes with 160° of visibility. These little lights are brilliant, easy to mount and cute as a button! Button Blinky front specs: - 2 high output surface mounted LEDs provide steady and flashing modes - FL1 Tested - Run times: 12 hrs (steady – 15 lm) and up to 40 hrs (flashing - 15 lm) - Provides 160° of visibility - One CR2032 battery (included) - Mounts with rubber stretch strap - 18 grams Button Blinky rear specs: - 2 high output surface mounted LEDs provide steady and flashing modes - FL1 Tested - Run times: 20 hrs (steady – 4 lm) and up to 50 hrs (flashing - 4 lm) - Provide 160° of visibility - One CR2032 battery (included) - Mounts with rubber stretch strap - 18 grams
Be seen with Sunlite's HL-L380/TL-L340 Combo. The front sports three bright Nichia LEDs, steady and flashing modes, and a 200-hour run time! A quick-release handlebar mount is included, too. What's more, the taillight has three LEDs, steady and flashing modes, and a quick-release mounting bracket.
- Front 10 lumen, Rear 4 lumen 3 LED - 4 modes each - 1 constant, 3 flashing - AAA batteries included - Water resistant construction - Easy to use, multi fit silicone rubber mount
- Single LED front and rear combo pack - 1-Super bright LED - Dual modes - steady and flashing - Water resistant alloy construction - Multi-fit QR bar/post mount - Uses 2x CR2032 lithium batteries (included)
Light your path and be seen with Sunlite's HL-L535/TL-L420 Combo. In front, three AAA batteries power five Cree LEDs for up to 70 hours of run time. Housed in a tough, water-resistant body with a quick-release bracket that fits a wide range of handlebars and featuring steady and flashing modes, the headlight provides the ultimate in versatility. For the taillight, four LEDs combine to give off a bright light that can be seen from all angles. This combo is perfect for commuting year-round.
- Supplies full wheel illumination for 700c/29in wheels and smaller - Approximately 40 hrs of battery life - Water resistant design - Includes 3 (AA) batteries - Sold individually (1 wheel) - Easy to install
Small, compact, quick and easy - there's no reason not to grab a pair of Cateye ORBs for your next ride. The ORB pairs a sleek, compact design housed in an alloy chassis. Conveniently, the lens itself serves as the light’s operating switch and is protected from inadvertent triggers due to the housing’s design while still allowing for side visibility. The ORB is available in front and rear versions and both feature 3 separate operating modes. Installation is quick and easy thanks to the heavy-duty rubber mounting strap and the rear version features an angled mount for seat post use. - Simple, lightweight and compact safety set perfect for kids and adults seeking a little more visibility - Easy installation and push button operation - Universal mounting strap easily attaches to bars from 22mm to 32mm - Side cut outs provide visibility from a wide angle for additional safety - Powered by two CR2032 cells per light
Looking for a bright, small set of lights you can mount almost anywhere? Planet Bike’s Spok Set is the logical choice. The translucent case offers 220 degrees of visibility. Steady and flashing modes give you up to 100 hours of run time. Rubber mounting straps allow for mounting on handlebars, helmets, and seat posts of all shapes and sizes. These lights are so small they almost disappear in a jersey pocket, so there's no reason not to throw them in before you take off on a warp-speed ride.
Sunlite's HL-L175/TL-L330 LED Combo is an easy way to be seen and stay safe when riding after dark. The powerful headlight uses an advanced 1-watt LED for brightness beyond its size. Plus, it boasts steady and flash modes, a 35-hour run time on the included AAA batteries, and it attaches to any bar via an easy quick-release mount. Out back, the taillight runs for up to 100 hours and casts a bright light with its 1/2-watt LED. And just like the headlight, it has steady and flashing modes.
Planet Bike's Beamer 1 & Blinky 3 Light Set will keep you safe when it's dark. For excellent visibility the Beamer headlight provides a focused LED beam and the Blinky taillight boasts 3 red LEDs. There are also quick-release mounts for easy on/off.
Lezyne's Femto Drive Pair are compact, bright, and beautifully made front and rear safety lights. The Femto Front is an ultra-compact safety light with integrated lens On/Off switch. Durable machined aluminum construction. Side Visibility lens extends beyond body to provide 180 degrees of visibility. Two replaceable CR2032 batteries power one bright LED. Up to 15 lumens with two output/flash options. Available in seven unique anodized colors. Versatile 2-in-1 Clip-On System straps to bars or clips to loops. The Femto Rear mirrors the design of the Femto Rear, but puts out up to 7 lumens of red light with two output/flash modes.
Looking for a great around town lighting system at a very reasonable price? The Duplex is just that. Providing both headlight and rear light in one unit, the Duplex easily mounts to your helmet with an included rubber strap and provides up to 100 hours of run time on only two AAA batteries. The light is easy to operate and can be switched between constant beam and flashing modes simply by pressing and holding a button. Making yourself visible in city traffic can help motorists see you better, and a good helmet-mounted light that is worn on your head, up and away from the distraction of car lights, can really make you stand out in a sea of vehicles. Use your head, and use a light. Features - Dimensions: 70.5 x 28.5 x 23 mm - Weight: 51.5 g (with bracket and batteries) - Light source: White LED x1, Red LED x1 - Battery: AAA alkaline battery x2 - Mount: Rubber band (Long) Modes/Run Time - (Front) Constant mode (15 lumens): 100hrs - (Rear) Constant mode (10 lumens): 100hrs - (Front) Flashing mode (30 lumens): 100hrs - (Rear) Flashing mode (10 lumens): 100hrs
For seeing the road and staying safe, CatEye's EL135/Omni 3 Light Kit includes their fine EL135 headlight and Omni 3 taillight. To light the way, the compact headlight with its no-tools universal quick-release handlebar mount boasts 3 super-bright LEDs, constant and flashing modes, and CatEye's OptiCube lens technology for a wider, 150-candlepower beam with excellent visibility. Meanwhile, for the back, CatEye's Omni 3 with their FlexTight mount and included clothing clip can be placed almost anywhere and it uses their Omni Directional Technology for 360 degrees of visibility and boasts 3 ultra-bright LEDs plus constant, flashing and rapid modes.
- Front Modes include High Steady, Low Steady, DayTime Pulse, NightTime Pulse and Economic Flash. - Rear Modes include High Flash, Low Steady, DayTime PULSE, NightTime Pulse and Economic Flash. - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 20 hours for front and 10 hours for rear - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged - Multiple Mounting Options: vertical or horizontal mounting options as well as a clip for mounting to packs, bags or belts
Topeak's HighLite Combo II is a lightweight set with plenty of power. The WhiteLite II headlight boasts 3 super-bright white LEDs with blinking and steady modes sure to catch the attention of drivers and other riders. And, the RedLite II taillight provides 4 LEDs worth of lighting power with steady and flashing modes. Best of all, neither light requires hardware to mount. Batteries are included.
The Lezyne Femto Drive Duo is a two-in-one safety light integrated into a versatile helmet mount. Front and rear light coupled by a composite matrix junction. Compatible with nearly all vented-style helmets. LEDs are housed in a super compact, lightweight and durable machined aluminum body. High-grade polycarbonate lenses provide side visibility and double as the power button. Front: 15 lumens, Rear: 7 lumens, two output modes. Easy to replace CR2032 batteries.
NiteRider understand lights are an integral part of your daily commute. Using a light can mean the difference between being seen or not by automobile drivers. Many of the “entry level” commuter lights are nothing more than “be seen” lights. Your overall safety and visibility should not be limited by your budget, that's why NiteRider created the Mako Series. The Mako line offers four models and up to 250 lumens, not only allowing the cyclist to be seen, but allowing the cyclist to see as well. A favorite feature is the side “gills” that emits light, it not only looks cool, but makes the Makos more visible. The Mako line is easy on the wallet and easy to operate. The TL 5.0 SL has five ultra bright LED's with four different operating modes, including three different flash modes. New for 2015, the amber Side Lights help to provide even more visibility from the sides of the rider. The TL 5.0 SL will help keep you safe and seen from behind (180 degree visibility). The TL 5.0 SL operates on 2 AAA batteries (included) for up to 100 hours on flash. MAKO 200 Side lights Economical, high output light Super bright flash setting ideal for daylight use Easy operation battery operated (comes with 2 x AA) 3 light settings – High, Low and Flash TL 5.0 SL 5 Ultra Bright LEDs 100 hours run time Inexpensive high quality light Super bright day time flash mode 4 operating modes Runs on AAA batteries FL 1 Standard IP64, water resistant MAKO 200 Lumen Output: 200 Run Time: 15:00 – 60:00hrs Weight: 175g Battery: Alkaline AA x 2 TL 5.0 SL Lumen Output: 10 Run Time: Up to 100hrs Weight: 70g Battery: Alkaline AAA x 2 WARRANTY The Mako 200 and TL 5.0 SL are both backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES MAKO 200 LED Light Head Handlebar Mount 2 AA Alkaline Batteries TL 5.0 SL LED Tail Light Seatpost Mount 2 AAA Batteries
A true two-in-one, the Stix Switch comes at you with a ying/yang mindset, flipping between red or white modes depending on your ride needs. Simply press and hold the button and you can go from a bright red taillight to a simple white headlight in seconds. Increase visibility and flexibility with the Stix Switch. - Headlight or taillight—you decide. - Press-and-hold for two seconds to shift between white and red modes. - Three white modes including: Steady (65 lumens), Power Flash (100 lumens), Eco Flash (35 lumens). - Five red modes including: Steady (18 lumens), Surge Glow (16 lumens), Power Flash (30 lumens), Disco Flash (15 lumens), Eco Flash (8 lumens) - 2- to 20-hour runtime. - Fresnel lens for maximum visibility in all directions. - Charges in the USB port of any laptop or phone charger in two hours (no extra cables needed). - Flexible mounting system works with handlebar and seatposts from 22.2mm up to 35mm in diameter, as well as most seatstays. (Aero strap mount available separately). - Red/Green battery charge level indicator. - Additional mounting options available separately.
MSW's TLT-200 lights are a small, simple, after-dark essentials. And don't let their small size fool you, these lights pack a punch! They're also water-resistant for those less-than-perfect days when you're racing the radar back home. • Simple mode selection: on, off, flashing • Universal attachment (fits 20-40mm) • Taillight mount is angled to fit seatposts • Output: 7 lumens rear (red) • Run time: 50 hours (steady), 150 hours (flashing)
Topeak's WhiteLite Race & RedLite Race Combo light set provides 2 super-bright LEDs in each light for excellent visibility. They attach easily with their no-tools rubber mount. The coin batteries (included) deliver up to 140 hours of run time. And, the combo lets you use a constant or flashing mode for versatility.
A bright and reliable urban bike light combo set. These lights provide cyclists with all the modes to stay bright as they pedal around town day or night. Beamer 80 specs: - High output surface mounted LED provides high power beam along with Courtesy and Superflash modes - FL1 run times: 6.5 hrs (steady – 80 lm), 24 hrs (Courtesy - 24-72 lm) and up to 70 hrs (Superflash - 80 lm) - Provides 130° of visibility - Water resistance rated to IPX5 standard - 2 AAA batteries (included) - A3 cam bracket mounts, adjusts or removes without tools - 63 grams Grateful Red specs: - PB 28 LED Power Array provide steady, Courtesy and Superflash modes - FL1 tested Run times: 26 hrs (steady – 13 lm), 45 hrs (Courtesy - 4-11 lm) and up to 150 hrs (Superflash - 13 lm) - Provide 160° of visibility - Highly visible, even in daylight - Water resistance rated to IPX3 standard - 2 AAA batteries (included) - Includes rear rack and seat post mounts plus rear clip for multiple mounting options - 85 grams
Portland Design Works' Spaceship 3 Headlight/Red Planet Taillight Set offers bright LED lights, front and rear, for super nighttime visibility. The Spaceship 3 headlight focuses three brilliant LEDs through a precision lens, illuminating your course ahead. Powered by 2xAA batteries, the Spaceship 3 includes both steady and flashing modes for up to 100 hours of run time. Includes the Mission Control 2.0 mount. The Red Planet is a bright, budget-friendly tail light that burns with the power of five red LEDs. The Red Planet runs on 2xAAA batteries and has three modes: steady, blinking, and dance. The Stayputnik seat post mount, with a UV-proof rubber strap, is included. Spaceship 3: - Three bright white LEDs - Runs on 2xAA batteries (included) for up to 100 hours of run time - 2 Modes: Steady and Flashing - Includes Mission Control 2.0 mount - Weatherproof exterior for all season riding - Weight: 91 g (3.2 oz) - Lifetime PDWarranty The Red Planet: - Five red LEDs - Steady, blinking and dance modes - Stayputnik mount included - Runs on 2xAAA batteries (included) - Weatherproof exterior for all season riding - Weight: 45 g (1.6 oz) - Lifetime PDWarranty
The Loop 2-RC Combo Kit is born from the same sleek, compact design and eye-catching visibility as the Loop 2, but is now rechargeable! With just 1.5 hours of charge time, you get 15 hours (flashing) and 4 hours (constant) run time on the front light and 10 hours (flashing), 2.5 hours (Constant) run time on the rear light. Installs easily on all 22–32mm diameter bars. Get noticed with the Loop 2 series of CatEye lights. - Dimension: 28 x 28 x 27mm - Weight: 18 grams (each light unit and battery) - Light source: LED x1 - Battery: Lithium-ion rechargeable battery (80mA) - Recharge time: approx 3hrs (USB2.0) - Runtime Flashing: approx 10 hrs - Runtime Constant: approx 2.5 hrs - Mount size: 22.0–32.0mm - Includes both front and rear safety lights
Stay easily seen on the road with the Lumacell's innovative ovalised lens, spreading light further. The Lumacell's full 180-degree glow keeps you safe on all sides even in gloomy cycling conditions. Direct USB charging means it’s portable and simple to reboot for the ride home. - 30 / 20 lumens (F / R) - Multi-position mount - Direct USB charging - IPX5 water proofing - Water tight seal
For complete visibility, a pair of Lezyne's Front and Rear KTV Drive Lights has you covered. Lezyne's KTV Front Light is a compact, high-visibility safety light with two ultra-bright LEDs. Durable, waterproof construction. Super lightweight. Provides up to 180 lumens and six output/flash modes. Side visibility cutouts for 180 degrees of visibility. Versatile 2-in-1 Clip-On System straps to bars or clips to loops. Integrated USB stick for convenient cable-free recharging. Lezyne's KTV Drive Rear also uses two ultra-bright LEDs and enjoys the same durable, waterproof, and super lightweight construction. It provides up to ten lumens and three output/flash modes with a wraparound lens for 180 degrees of visibility. Unique aero and round post compatible design, and features the same integrated USB stick as the front light for convenient cable-free recharging of your entire set.
Page 1 of 3 Next page